Pages

2019-04-08

Zone Damper Motor, For Your HVAC Needs

By Daniel Watson


HVAC systems are important appurtenances in the house. Where certain influences may make it uncomfortable and inconvenient, this system works to make your abode essentially habitable. That is why it can be a pretty piece of work when it breaks down, especially when its the Zone damper Motor.

There are manual motors. What is usual and more convenient now, though, is the electric motor. Nonetheless, designs and mechanizations still come in spades.

Another factor that you should not skate over is the thermostat. At each zone, there should be an individual thermostat so that the damper in the air ducts may be satisfactorily controlled. When you are trying to vamp up the performance of an air conditioner, it is the thermostat which detects the need and therefore controls the damper to accordingly open up. When the desired temperature is reached, it closes the damper.

The electric motor, in this regard, is controlled by a building automation system or perhaps a thermostat. Solenoids may also be used. The thermostat can come in useful during the calibration of airflow. This step, in its turn is used to modulate the stream of air conditioning agents to efficiently control the climate.

You can do this by installing, say, two zones in a two story building. Put one downstairs and another one upstairs. When one zone achieves your desired temperature, then the main thermostat works to slow or altogether stop further airflow to that zone and, instead, force more air to the remaining zone. That will actuate satisfactory temperature levels throughout your whole house.

Also, you have the pneumatically operated or the vacuum operated damper. This type is equipped with a thermostat which switches the pressure on and off. There may also be a spring loaded rubber diaphragm therein that can move the damper. Like the above style, they also spring back to their default position if power is cut off. However, the default is open, not closed, and that gives wider berth for the flow of air.

There are yet many kinds of systems, too many to be enumerated. The given positions are not just limited to elementary opens and closings. Rather, they also efficiently regulated air volume and temperature. Whatever the style and mechanism, they are designed with the same endpoint. That is, when you need air, then the dampers are opened up, inviting its flow in.

As said, dampers may come in manual and electric varieties. The thing to keep in mind is that most modern ones subscribe to the latter. However, further mechanizations may be viable. One can also pitch in the use of compressed air or vacuum. Mechanical means are likewise viable.

For greater servings to comfort and also greater energy efficiency, this zone dampers have got you covered. Make sure to source only from certified manufacturers, so that you know you have the real deal. Similarly, in getting parts and components, make good sure that you source merely original equipment manufacturers parts.




About the Author:



0 add comment::

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More